D sub connector D-sub right angle connector

D sub connector D-sub right angle connector 1,BLUE MINI VGA; 2, D-SUB 09PIN,15PIN,25PIN,37PIN,44PIN Male/Female 3, PCB Conn

D sub connector D-sub right angle connector

1,BLUE MINI VGA;2, D-SUB 09PIN,15PIN,25PIN,37PIN,44PIN Male/Female3, PCB Connectors 

 

D-SUB
Material		Housing	High Temperature thermoplastics:PBT 94V-0
			Color: Black or White
		Contact	Brass/Phospor Bronze
		Shell	SUS 301/Brass/Phospor Bronze
Plated		Contact	Gold plated  (G/F,5U"/10U''/15U''/30U'')
		Shell	Gold/Nickel
Materials and plating can be varied
according to customer definition.
Mechanical Spec.		Insertion Force	35 N Max
		Extraction Force	10N Min(Initial),
			8N Min(10000 Cycles)
		Durability Life	50000 Times
Electrical Spec.		Contact Current Rating	1.5 Amperes
		Dielectric Withstanding Voltage	AC 500V r.m.s
		Insulation Resistance	≥100MΩ
		Contact Resistance	≤30mΩ
		Operating Temperature	-25 oC - +85 oC
Environmental Spec.		Have passed below tests:
		1.Salt Fog Test
		2.AIR Reflow Soldering Test
		3.Mechanical Vibration Test
		4.Adhered Tin Test
		5.Temperature Cycle Test
		6. High frequency test
		… …
Application		The D-subminiature or D-sub is a common type of electrical connector used particularly in computers. At the time of introduction they were some of the smaller connectors used on computer systems.Hard disk,Network scanner,Monitor,Digi-camera,Telecamera,Packet-routing,SDXC,Memory card,nand flash,CCD,SSD,Keyboard,Printer,Invigilator,flash drive and cable ASSY.

  

A D-sub contains two or more parallel rows of pins or sockets usually surrounded by a D-shaped metal shield that provides mechanical support, some screening against electromagnetic interference, and ensures correct orientation. The part containing pin contacts is called the male connector or plug, while that containing socket contacts is called the female connector or socket. The socket's shield fits tightly inside the plug's shield. The shields are connected to the overall screens of the cables (when screened cables are used). This creates an electrically continuous screen covering the whole cable and connector system.

D-subminiature connectors were invented by ITT Cannon, part of ITT Corporation, in 1952.[1] Cannon's part-numbering system uses a D as the prefix for the whole series, followed by a letter denoting the shell size (A=15 pin, B=25 pin, C=37 pin, D=50 pin, E=9 pin), followed by the actual number of pins, followed by the gender (P=plug, S=socket).[2] For example, DB25 denotes a D-sub with a 25 position shell size and a 25 position contact configuration. The contacts in these connectors are spaced approximately 0.109 inches (2.77 mm) apart with the rows spaced 0.112 inches (2.84 mm) apart.[3] (To be precise, the horizontal contact spacing is 326/3000 = 108/1000 = 0.1086 inch per row, with the second row offset by half that amount.)

Cannon also produced "hybrid" D-subs with larger positions in place of some of the normal pin positions that could be used for either high-current, high-voltage, or co-axial inserts. The DB13W3 variant was commonly used for high-performance video connections; this variant provided 10 regular (20) pins plus three coaxial contacts for the red, green, and blue video signals. Hybrid D-subs are currently being manufactured in a broad range of configurations by other companies, including Amphenol, Conec, Teledyne Reynolds, Assmann Electronics, Norcomp, Cinch, 3M, and Tyco. Variations include current ratings up to 40A, operating voltages as high as 13,500V, and waterproof variants that are certified to IP67 standards.

In the photograph below, the connector on the left is a 9-pin male (DE-9M) connector plug, and the one on the right is a 25-pin female (DB-25F) socket. The hexagonal pillars at either end of each connector have a threaded stud (not visible) that passes through flanges on the connector, fastening it to the metal panel. They also have a threaded hole that receives the jackscrews on the cable shell, to hold the plug and socket together.

We take small orders, prompt delivery,  good service

D sub connector D-sub right angle connector